Search

Kinetrol Model 16

Operating Specifications Output Torque: 27000 lbf ins/3100 Nm at 100 psi/7 bar Angle of Travel (adjustable): 80° – 100° (restricted travel versions available) Displaced Volume: 465 in3/7630 cm3 Finish: Epoxy stove enamel Weight: 82.5 lb/37.4 kg (excluding coupling)

GENERAL SPECIFICATIONS

  • Casing: Models 0M0, 01, 02, 03, 05 & 07 Pressure die cast ZL16 zinc alloy. Models 08, 09, 10, 12, 14, 15, 16, 18, 20 & 30 Die cast or sand cast aluminum alloy.
  • Vane & output shaft: Models 0M0, 01, 02, 03, and 05 stainless steel. Models 07 to 30 SG iron, zinc plated.
  • Shaft bushes: PTFE-coated bronze.
  • Seals: Moulded polyurethane. High and low-temperature seals are also available – contact Kinetrol.
  • Seal expanders: Stainless spring steel. Couplings: Weldable mild steel, zinc plated.
  • Working temperature range: -20°C (-5°F) to 80°C (175°F). High-temperature option up to 100°C (212°F) using temperature seals and higher temperatures with special equipment – contact Kinetrol for details. * Low-temperature option down to -40°C (-40°F) include option “L” at end of actuator coding. *Contact Kinetrol for Atex Approval rating.
  • Maximum recommended working pressure: 100 psi (7 bar) Maximum overload pressure: 150 psi (10 bar)

Options

All of Kinetrol’s modular options provide the functionality and control you need in an easy-to-mount, space-saving package. Option packages include:

  • Limit switch boxes for open/close indication – various switches for hazardous areas
  • Solenoid valve
  • Fail-Safe Spring Return Unit
  • AP pneumatic positioner
  • EL electropneumatic positioner
  • P3 on/off positioner including hazardous areas
  • Clear Cone position monitor
  • Female drive spring
  • ISO adaptor
  • Spring to center
  • Geared manual override


Specs & Brochures