Anderson Greenwood’s ACCU-Mount system is designed for the installation of instruments on fiscal metering applications. Accu-Mount Systems provide close coupling to the orifice tap and full porting to help reduce any possible measurement

Materials: CS, SS, Monel®, Hastelloy®, Duplex and other exotic materials Seats: Metal and Soft Instrument Connections: 1/4” to 1/2” threaded or flange mountingProcess Connections: 1/4” to 1/2” threaded or flange

Materials: CS, SS, Monel®, Duplex and other exotic materials Seats: Metal and Soft Connections: 1/2” to 3/4” threaded, welded also available Pressure (max): M25: 6,000 psig (414 barg) M251: 10,000

Anderson Greenwood hand valves are suitable for all instrument isolation duties, helping provide bubble tight shut-off time after time. Hand valves have metal or soft seats for gas, vapor or liquid

Compact, lightweight multi-port valves for pressures up to 6,000 psig (414 barg) or 10,000 psig (690 barg (M5K, M5AK, M5YK; M5K; M5AK; M5YK) All root valves have a four bolt

The range of primary isolation double block and bleed valves meets both instrument and piping engineers’ specifications, offering significant savings on space, weight, installation and cost. Suitable for line isolation,

Our range of primary isolation double block and bleed valves meets both instrument and piping engineers’ specifications, offering significant savings on space, weight, installation and cost. Keyblok manifolds are suitable

A ⅜ inch (9.5 mm) orifice multi-port gauge valve that is available with replaceable roddable metal or soft seats for pressures up to 6000 psig (414 barg) M5A Multi­Port Gauge

A ¼” FNPT x (3) ¼” FNPT multi-port block valve for universal use wherever more than one outlet is required M5F Multi­Port Gauge Valves Features: Specs & Brochures

A ¼” FNPT x (3) ¼” FNPT multi-port block and bleed valve for universal use wherever more than one outlet is required M9 Block and Bleed Gauge Valves Features: Specs

The Modular Mounting System for instrument impulse line installations and has particular applications in the petrochemical and refining industries. Modular mounting systems are based on a standard mounting plate, it allows

Monoflange manifolds can be mounted directly on vertical or horizontal flanged connections, allowing a gauge to be kept in an upright position. Monoflanges are suitable for both primary isolation (double block

Materials: CS, SS, Monel®, Duplex and other exotic materials Seats: Metal and Soft Connections: 1/4” to 3/4” threaded, flanged, also available for direct mountingOrifice Sizes: 0.136” [3.5 mm], 3/16” [4.7

Close coupling of differential pressure transmitters; close couples onto orifice flange unions. Patented design does not require impulse lines or mounting brackets. Enhanced transmitter performance with 3/8” [9.5 mm] bore. For

Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6,000 psi (414 barg) Series M5K 5AK M5YK Gauge Valves Features: Specs & Brochures