Pratt Surge Inhibitor Check Valve

Sizes: 3″ through 24″. The disc surge inhibitor assembly shall be replaceable and adjustable in the field without removing the valve from the line. The valve disc shall be cycle-tested 1 million times, in accordance with ANSI/AWWA C508, and show no evidence of wear, cracking, or distortion.

Pratt Surge Inhibitor Check Valve Specifications:

  • Sizes: 3″ through 24″ flanged ends
  • Body: Ductile Iron
  • Disc: Buna-N encapsulated steel
  • Seat: 45° non-slam seat
  • Flexor Assembly: Stainless steel
  • Complies with AWWA C508 Standards
  • NSF/ANSI 61/372 Certified

The Pratt Surge Inhibitor check valve utilizes a reinforced flexible disc element. The materials of construction for the disc element are comprised of a stainless steel hinge pin with nylon reinforcement in the hinge section and an alloy steel disc plate, all of which, are fully encapsulated in a specially formulated rubber compound that resists wear and ensures years of maintenance-free performance. The hinge tab of the flexible disc is secured between the valve body and the disc. The disc is able to pivot about the reinforced hinge section. The speed at which the Pratt Surge Inhibitor Check valve closes depends upon the dynamic recovery factor of the disc.

Specs & Brochures